| Section Products |
|
|
 |
Aylook |
|
|
|
|
|
|
|
|
|
|
|
|
|
Aylook for
special applications |
|
|
|
|
|
Aylook accessories |
|
|
 |
|
|
|
|
Aylook applications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other produts |
|
|
|
|
 Contact
to test IP camera, Aylook videorecorder or the
mobile/palm phone application.
...go
to the page -> |
|
|
 Aylook
is a hybrid video recorder for IP and analogue video surveillance
systems.
...go to the page -> |
|
|
|
 |
PRODUCTS: AYDO CONTACTS CARD
 |
| Aydo |
 |
| Aydo |
The AyDo contacts card grants perfect integration
with pre-existing anti-intrusion control units.
This component adds 5 programmable inputs and 8 programmable
outputs to Aylook.
It also makes it possible to interface Aylook
with alarm control units, gate openers, air conditioning
systems.
Each Aylook can manage up to 4 AyDo modules; each
module is equipped with 5 inputs (clean contacts)
and 8 digital outputs (max 50V/100mA).
The contact management, both for outputs and inputs
is fully customisable and in fact it is possible to
define:
- "open" contact;
- "close" contact;
- Status change;
- time impulses management.
Contact management can be automated using the Aylook
software so that any input status detected may change
the output statuses.
AyDo can therefore replace an alarm control
unit with a telephone dialer.
Application example: doorbell/gate opener
Scenario: When the entrance
doorbell is pushed, AyDo activates the surveillance
camera, buzzes the virtual doorbell and switches on
the relevant light on the Ingressi/Uscite Live [Live
Inputs/Outputs] panel. When the virtual button “Apri
cancello” [Open Gate] is pushed, the gate is opened
and the camera is switched off.
Description: AyDo's output 1 has
been connected to a relay that controls the gate
opening and closing, the surveillance videocamera
power supply is connected to output 2 while the
gate opening button is connected to AyDo's input
1
When the key is pressed, the status of input 1 changes,
a fact which triggers the related actions: the virtual
doorbell buzzes (event with acoustic notification),
the lights in the Ingressi/Uscite panels switches
on (warning light status changes) and the Output
2 status changes, and as a consequence of this the
gate camera is switched on and powered thanks to
the relay.
|
